Tygon® LP-1200

Flexible Fuel Tubing

Tygon® LP-1200 tubing from Saint-Gobain is ideal for lawn and garden power equipment, lawn and lubricating oil, small engine fuel lines, and grease transfer lines, and it is specially designed to meet evaporative emission standards of 15g/m²/day. This patented tubing’s robust, multi-layer construction is extremely tight fitting and resistant to swelling, hardening and cracking caused by hydrocarbon-based fluids.

Features & Benefits

  • Transparent & easy to diagnose fuel flow or leak problems 
  • High purity fluoropolymer inner liner & reduces the risk of fuel system fouling from extractable solids found in typical rubber products 
  • Superior fuel resistance and compatible with ethanol-enhanced fuels & worry-free operation 
  • Excellent fitting retention & 100% seal for optimum safety 
  • Superior flexibility & easy assembly, routing and optimized fuel pick-up
  • Excellent elasticity & prevents “necking” from over-stretching during installation 
  • Submersible* & applicable with most fuel applications*

*Not recommended for reuse in higher temperature applications.
 

Typical Applications

  • Brush cutters 
  • Chainsaws
  • Cut-off machines 
  • Earth/ice augers
  • Edgers
  • Engine drills
  • Hedge and weed trimmers
  • Leaf blowers
  • Pole pruners
  • Split-boom products
  • Tillers

Specifications

Inner Diameter in (mm) Outer Diameter in (mm) Wall Thickness in (mm) Minimum Bend Radius in (mm) Maximum Working Pressure Psi (Bar) Vacuum Rating inHg (mmHg)
0.125 (3.18) 0.25 (6.35) 0.063 (1.59) 0.375 (10) 60 (4.1) 29.9 (760)
0.188 (4.76) 0.313 (7.94) 0.063 (1.59) 0.5 (13) 45 (3.1) 29.9 (760)
0.25 (6.35) 0.375 (9.53) 0.063 (1.59) 0.625 (16) 30 (2.1) 29.9 (760)
0.094 (2.38) 0.188 (4.76) 0.047 (1.19) 0.25 (6) 65 (4.5) 29.9 (760)
0.08 (2.03) 0.14 (3.56) 0.03 (0.76) 0.25 (6) 70 (4.8) 29.9 (760)

Physical Properties

Durometer Hardness Shore A (Shore D) 78
Tensile Strength Psi (Mpa) 3600 (24.8)
Ultimate Elongation 475
Tear Resistance, Ib-f/in (kN/m) 500 (87.6)
Specific Gravity 1.27
Water Absorption 0.7
Compression Set Constant Deflection 35
Minimum Recommended Operating Temp °F (°C) -40 (-40)
Maximum Recommended Operating Temp °F (°C) 180 (82)
Brittleness by Impact Temp °F (°C) -130 (-90)
Low Temp Flexibility °F (°C) -40 (-40)
Tensile stress at 100% Elongation Psi (Mpa) 668 (4.6)

Characteristics

Markets
  • Fuel Lines
Regulation
  • CARB
  • EPA B1-15

Related Documents

Download Selected (0)
Catalog: Tygon & Versilon Fluid Transfer Tubing
PDF | 40 pages | 3.79 MB
Catalog: Tygon & Versilon Fluid Transfer Tubing
Digital Printing Tubing Selection Guide
PDF | 1 page | 201.42 KB
Digital Printing Tubing Selection Guide
Article: Ethanol Compatibility of Tygon® LP-1200 Fuel Tubing
PDF | 2 pages | 462.95 KB
Article: Ethanol Compatibility of Tygon® LP-1200 Fuel Tubing